How we work

From first message
to finished fence in 14 days.

A straight path. Free site survey, fixed quote, manufacture, install, walkthrough. One project manager from start to handover.

Step 01 · Day 0–2

Site survey

You send a photo and rough length. We come on-site within 48 hours in the five major provinces, or work from your photos and dimensions elsewhere. We measure, photograph, and ask the questions that matter (footing, slope, access).

Step 02 · Day 2–3

Fixed quote

One number. Pattern, color, linear meters, panel height, any site adders agreed in advance. Valid 30 days. The number on the quote is the number you pay.

Step 03 · Day 3–10

Manufacture + delivery

Panels cut, assembled, powder-coated, packed in nailed wooden frames. Delivered to your site by our logistics partner. You see the panels before they go in the ground.

Step 04 · Day 10–14

Install + handover

Our crew sets posts in concrete footings, levels every panel, finishes caps, cleans the site. We walk the line with you on completion. Warranty card and care guide handed over in print.

Warranty

Engineered to outlast the building it borders.

Our warranty is in writing on the back of the quote. It is honored by phone or LINE with the project reference number.

  • Structural frame15 years against bending, cracking, joint failure under normal use
  • Powder coat7 years against UV fade beyond 5 Delta-E, peeling, or blistering
  • Workmanship2 years on the install itself (post settlement, alignment)
  • What's coveredReplacement panel or section, including labour, free of charge
  • What's excludedVehicle impact, vandalism, alteration by third parties, floods
  • Care requiredRinse with fresh water 2× per year. That is the entire maintenance schedule.

Why aluminum, why not real bamboo

Real bamboo in Thailand's monsoon and salt air typically splits within 18–24 months and needs sealing twice a year. Once it starts splitting, the visual line is broken and there is no recovery.

Aluminum imitation-bamboo skips that cycle. The aesthetic stays consistent. The owner stays out of the maintenance economy. The decision pays for itself by year three on most resort and villa installations.

Frequently asked

Honest answers to the questions we get most.

How is your price calculated?

Pattern × measured area + agreed site adders. Standard install is included in the per-square-meter price. Site adders (old fence removal, footings in rock, sand-base footings deeper than 40cm, stairs, travel beyond 100km from our nearest crew base) are quoted in advance, never billed later as a surprise.

Do you do small jobs?

Minimum order is 10 linear meters. Below that, the truck and crew costs dominate the bill and the price stops making sense for either side.

Can you match a color we already have on the property?

Yes. Our four stock finishes cover most cases (Honey, Pale, Forest, Terracotta). Custom RAL colors are available on orders above 50 linear meters with a 14-day extra lead time.

What about gates and corners?

Both are part of the same engineering family. Gates use heavier 80mm or 100mm posts and concealed hinges. Corner posts are reinforced for line-tension. Both are quoted as line items on the same page as the fence.

Will it rust near the sea?

Aluminum does not rust. It can develop a light surface oxide in heavy salt air after several years. The powder coat sits above the metal and is what you actually see. We have installs on beachfront sites in Phuket and Samui that look the same after three years as on handover day.

Can I see one in person before ordering?

Yes. Send us your nearest city, we tell you the closest install we can show you in person. For resort projects, we can also bring a sample panel on the site survey visit.

Ready for a fixed quote?

Photo, length, location. We respond inside one working day with a real number you can budget against.